Projecta IM2000 Instruções de Operação descarregar pdf (Página 24)

ground leads to each driver from the power supply. The following twisted pair

jacketed Belden cable (or equivalent) are recommended for use with the IM483.

 Belden Part# 9740 or equivalent 18 Gauge

AC Line Filtering

Since the output voltage of an unregulated power supply will vary with the AC

input applied, it is recommended that an AC line filter be used to prevent

damage to the IM483 due to a lightning strike or power surge.

WARNING! Verify that the power supply wiring is

correct prior to power application. If +V and GND are

connected in reverse order, catastrophic damage to

the IM483 may occur! Ensure that the power supply

output voltage does not exceed +48 VDC, which is the

maximum input voltage of the IM483!

WARNING! Hazardous voltage levels may be present if

using an open frame power supply to power the

IM483!

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 76 77

Sem comentários

Projecta IM2000 Instruções de Operação Página 24